Focus on manufacturing color stone coated roofing tiles for 16 years high-end products make high-end brand.

How to deal with the problem of slipping when installing the colored stone metal tile?

by:New Sunlight Roof      2021-06-12
Color stone metal tile eaves When installing the color stone coated steel roof tile, you need to pay special attention. If it is not handled well, it is easy to slip. What should be done? First of all, we need to understand the length of extension. The length of the main tile extending out of the eaves should be 30 mm, not too long or too short. Secondly, an additional layer of waterproof cushion should be added to the cornice, and the width should not be less than 900mm. Later, when the eaves are not eaves, ventilated eaves are used to seal the eaves, and the upper and lower ends of the ventilated eaves are directly fixed on the upper and lower ends of the hanging tiles, and the long wooden slats are used to fix the wall; when the eaves are eaves, the eaves The tiles are laid over the cornice and extend 30mm from the cornice. The above are some of the issues that need to be paid attention to when dealing with colored stone metal tiles, so you can refer to them when installing. The treatment of the roof affects the future use. When there is a problem, the repair will not be the same, and there will be many defects, which will seriously cause water leakage. The installation of the ridge tile is also the same. Let’s first understand what details are needed. deal with? The first thing to do is to cut off the remaining part of the main tile and the ridge tile (including the main ridge and the oblique ridge), leaving a width of 5cm. Then fold it up by 5cm and fix it with nails on the ridge tile hanging tile, then buckle the ridge tile on it, and use self-tapping nails to fix it on the two sides with the hanging tile. Each piece of round ridge tile or angle ridge tile is fixed 4 self-tapping screws, each square ridge tile self-tapping screw spacing 40cm. Special end caps must be installed at both ends of the main ridge and the outer end of the oblique ridge, and pull rivets are used for installation. After checking, the ridge tiles after installation should be straight, without undulations and distortions, so that the roof outline is neat and beautiful. After all processing, pay attention to the overall inspection, because a little sloppy directly affects the later use effect. Tag: color stone coated steel roof tile installation, (1,261)
New Sunlight Roof is the leading manufacturer of metal roofing supplier and related products.
Now you can buy cheap at wholesale price at Foshan New Sunlight Roof Co.,Ltd! Do visit New Sunlight Roof for great deals!
A quality monitoring group created for ensuring that Foshan New Sunlight Roof Co.,Ltd manufactures metal roofing supplier accoording the strictest standard.
have three basic components.
Overall, metal roofing supplier may be a great way for manufacturers to expand their use of technology, but the price could present a significant hurdle for some businesses.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: